Leica Geosystems Leica DISTO Pro - Manual (Page 46)

48 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
Storing with Enter key
When a value displayed in the basic
setting is to be stored:
Press and hold.
The display shows
• the next free memory location,
• a cursor to enter text.
If desired, enter text as described
earlier.
Press breifly to store.
After a confirmation the basic
settings are displayed.
If all results of a calculation are to be
stored (e.g. pythagoras, triangles,
heights, ...) in the data memory:
Press and hold immediatedly
after computed results are
displayed.
The display shows
• the next free memory location,
• a cursor to enter text.
Select desired entry from list.
Press briefly to confirm entry.
Follow same procedure to input
subsequent entries from the list.
Press briefly to end and store
text entries.
After a short confirmation the basic
setting are displayed.
In storing a new value, the
DISTO automatically uses
the first two text lines of the last
memory location.
By clearly describing stored
values, misunderstandings
and questions can be avoided.
Enter text as described in menu
function (6.4.1).
Press briefly to move cursor
to next text line.
Press briefly to end and store
input.
After a confirmation basic settings
are displayed.
As an alternative text input can be
made from a predefined list.
Precondition: The list was loaded
into DISTO previously (read Online
documentation on supplied CD-
ROM).
Press briefly to display the
list of the predefined texts.
Memory, contd.
Hallway
Shower
WC
Bath
store 6.4.2
002
abc
_ >
If desired, enter text in the first line
as described earlier.
This text is automatically
used for the next following
results.
The two other lines
• are reserved for text input,
• contain text predefined by the
calculation function.
Press briefly to store results
one after the other.
After a confirmation the basic
settings are displayed.
Change (6.4.3)
With this menu function, data stored
to memory can be changed
subsequently.
After calling up the menu function,
the menu displays
• the last stored value,
• the number of the memory location,
• the amount of occupied memory
locations and the occupancy of
memory in percentage.