Leica Geosystems Leica DISTO Pro - Manual (Page 23)

25 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
End covers, contd.
DISTO changes to Normal
mode and displays basic
settings. The symbol for the
instrument without end cover
appears.
Avoid using DISTO without
end cover as the battery
cover is then exposed and may be
damaged.
Adapter end cover (2.2)
The settings for how the adapter end
cover will be used are made here.
These settings determine the rear
reference of the DISTO.
Default setting: none, meaning that
after a reset all settings remain.
Without add-on (2.2.1)
Select this menu function when the
adapter end cover is used without
any further add-ons.
After pressing the Enter key a short
confirmation appears and the menu
function is terminated.
DISTO changes to Normal
mode and displays the
symbol of the adapter end
cover in the basic settings.
Accessory 723775 (2.2.2)
This menu function sets rear
reference to the adapter end cover
with the optional short bracket (read
User Information, Accessories).
After pressing the Enter key a short
confirmation appears and the menu
function is terminated.
DISTO changes to Normal
mode and displays the basic
settings. The symbol of a
special adapter appears.
Accessory 723776 (2.2.3)
This menu function sets rear
reference to the adapter end cover
with the optional long bracket (read
User Information, Accessories).
After pressing the Enter key, a short
confirmation appears and the menu
function is terminated.
DISTO changes to Normal
mode and displays basic
settings. The symbol of a
special adapter appears.
Set pivot gap (2.2.4)
Set pivot gap in this menu function
when a stand is used with the
adapter end cover.
To adjust rear reference, the distance
from the rear side of the adapter end
cover to the rotation axis of the stand
has to be entered.
For stand SLIK U9000,
recommended for use with
DISTO, this distance is0.054 m.
The last saved entry for the pivot gap
between adapter end cover and the
rotation axis of the stand is
displayed.
Enter new pivot gap with keypad,
recall value from keypad memory or
from the stack.
Brief press confirms entry.
Renewed press quits menu.
A short confirmation is displayed and
the DISTO changes to Normal mode.
adapter end cover 2.2
1 without add-on
2 accessory 723775
3 accessory 723776
4 pivot gap
5 individual extension
0.000m
pivot gap 2.2.4
After calling up the menu function,
the following is displayed: