Leica Geosystems Leica DISTO Pro - Manual (Page 11)

13 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
After a long pause or by pressing
another key the cursor changes to
the next display.
If one of the 0-9 keys are
pressed for a long time, its
number appears on the screen.
Result ( = ) / Enter key
Press briefly to:
- finalize a computation and to
display the result.
- end a menu function and display
the result.
- confirm an input or setting.
- confirm a single measurement in the
menu function.
- jump from the menu to the selected
sub menu.
Press and hold to save a
value into the data memory.
With menu functions, all results are
saved in sequence to the data
memory.
Plus / navigation key (up )
Minus / navigation key
(down)
Press respective keys briefly in
normal mode to:
- enter an addition or subtraction in a
computation
- move up or down from one entry to
the next in menus.
Press respective keys briefly in
Pointing mode to change
measurement reference.
Press both keys
simultaneously to turn
DISTO off in Normal and
Pointing mode.
Or as an alternative, press
and hold one of the keys and
then press the other.
Keypad, contd. How to use instrument
For a first time use, insert new
batteries into the DISTO (for battery
type read the technical data sheet).
This symbol appears in the
display as soon as the
battaries are empty and need
to be replaced.
When changing batteries, the
settings and saved measured
values remain unchanged in the data
memory.
Inserting / replacing the
batteries
1. Press end cover release button,
and pull the end cover off the
instrument.
2. Press both locking clips together
with fingertips and pull out battery
cover.
PD-Z07
3. Remove empty batteries, if any. Fit
new batteries the right way round.
PD-Z06
PD-Z08