Leica Geosystems Leica DISTO Pro - Manual (Page 20)

22 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
Meters are automaticlly
subtracted without having to
press the menu key.
Press briefly to confirm
entered subtraction.
Press briefly again to
terminate menu function.
A short confirmation is displayed and
the DISTO switches to Normal mode.
The uppermost line of the
basic setting displays the
symbol of the subtraction.
Subtract
- is valid for all following
measurements,
- is automatically suggested at the
next menu function call up.
Off (1.2.3)
Deletes an existing addition or
subtraction.
After a brief press on the Enter key a
confirmation appears and the menu
is quit.
Measurement settings, contd.
The DISTO changes into Normal
mode and displays the basic
settings.
Time delay release (1.3)
Sets time delay between 5 - 60
seconds after pressing the trigger
key to the start of the measurement.
Default setting: None (1.3.3)
The time delay release permits using
the DISTO in measuring situations
where the keypad is hard to reach.
This symbol appears in the
uppermost line of the basic
settings when the time delay
release is in use.
timer 1.3
1 once
2 permanent
3 none
10 sec
once 1.3.1
The suggested delay is only for the
next single measurement and can be
changed as follows:
With the navigation keys.
Each key press increses,
respectively deceases delay
by 1 second.
With a keypad entry.
As long as this key is
pressed the delay increases
until the maximum of 60
seconds is reached.
Add
- is valid for all following
measurements,
- is automatically suggested at the
next menu function call up.
Subtraction (1.2.2)
After calling up this menu function,
the following is displayed.
Enter subtraction with keypad
or call it up from the keypad
or stack memory.
Do not enter minus sign for
subtraction.
Press briefly to display unit of
subtraction.
subtraction 1.2.2
0.000m
-
Once (1.3.1)
After calling up the menu function,
the following is displayed.