Leica Geosystems Leica DISTO Pro - Manual (Page 14)

16 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
Reset menu functions
The "Reset" command (3.4) enables
settings and menu functions to be
reset to a predefined basic setting.
The basic settings are listed in the
description of the menu functions.
Quit menu
Press and hold to quit menu
and to display basic settings
in Normal mode.
Short cut
Each submenu function has a
numeric code, a so called short cut
number.
By entering the short cut number, a
submenu or a menu function can be
selected directly.
Short cut numbers are listed
in brackets when menus or
menu functions are being described
(e.g. 1.4.2). An overview of short cut
numbers can be found in the short
cut index and in the Quick Guide.
done
Using menus, contd.
Press briefly .
Enter short cut number,e.g.
1-4-2 for permanent laser
operation.
Submenus appear step-by-step until
the desired menu function.
After the completion of the entry of
the short cut number the menu
function is carried out and a brief
confirmation is displayed.
Use the short cut to save
time when calling up
frequently used menu functions.
Correct menu selection
Press briefly to display the
previous menu.
Using end covers
DISTO is delivered with the swivel
foot end cover already attached.
Two additional end covers and
accessories, available as options,
enable the instruments to be adapted
to varying measuring situations.
Automatic end cover recognition
Magnetic sensors at the back of the
instrument make it possible to
recognize if an end cover with swivel
foot or positioning bracket/alignment
aid has been attached.
The instrument symbol in the basic
settings display includes the symbol
of the detected end cover and
measurement is referenced
accordingly.
Automatic end cover
recognition
- does not work with the adapter end
cover,
- does not change the preset
measurement reference.
Automatic end cover recognition can
be switched off with menu function
"Recognition off" (2.3.2).