Leica Geosystems Leica DISTO Pro - Manual (Page 18)

20 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
Volume
Repeat, double measured
value
= Sum (circumference)
Area
Measurement x measurement = area
Measurement (e.g. 3.500m)
Multiplication
Measurement (e.g. 8.375m)
= Area (e.g. 29.313m²)
PD-Z39
PD-Z37
Measurement x measurement x
measurement = volume
Measurement (e.g. 3.500m)
Multiplication
Measurement (e.g. 8.375m)
Multiplication
Measurements (e.g. 2.285m)
= Volume (e.g. 66.980m³)
PD-Z40
The volume can also be
computed following an area
calculation.
Menu Functions
Menu functions are described in the
sequence of their appearance on the
DISTO display, i.e. in an ascending
order of their respective short cut
numbers.
The short cut numers are listed in
brackets behind the menu function.
How to use the menus is explained
in section "How to use the
instruments" under "Using menus" .
The short cut numbers
facilitate searching for menu
functions.
Measurement settings (1)
Measurement reference (1.1)
Set measurement reference for the
DISTO, showing where measure-
ments will be made from.
The set measurement reference is
used for all following measurements
until the it is changed again.
Basic setting: Rear (1.1.3)
menu
1 measure settings
2 end cover
3 basic settings
4 basic functions
5 calculation
6 memory
measure settings 1
1 reference
2 offset
3 timer
4 laser
5 tracking
reference 1.1
1 front
2 stand
3 rear
Length, contd.