Leica Geosystems Leica DISTO Pro - Manual (Page 34)

36 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
Basic functions, contd.
Press briefly to end minimum
tracking.
Press briefly to confirm
displayed measured value.
The third measured value appears
beside the corresponding number
"3".
Each of the three displayed
measured values can be
selected again with the navigation
key and corrected by a new
measurement.
Press briefly to compute and
display the disired distance.
Press briefly again to quit
menu and display the result
in the basic settings.
If desired save result to the keypad
or data memory.
Accuracy (4.6)
This menu function calculates the
average value out of 10 sequential
distance measurements.
Reasons for use:
• To achieve more exact results by
reducing the deviation.
• To compensate for shaky
measurements when DISTO is held
by hand.
Using this menu function
does not improve the
specified measuring accuracy of the
DISTO!
This menu function cannot be
set permanently.
After calling up this menu function,
the following is displayed:
The laser lights up in the Pointing
mode.
Point at target with laser.
Press briefly to trigger
measurement.
DISTO performs 10 single
measurements and displays the
computed average value. The laser
switches off.
Press briefly to quit menu
and display average value in
basic settings.
If desired, save result to the keypad
or data memory.
Average value (4.7)
This menu function computes
the average value of
measurements made by the user.
It is possible to compute the average
values of up to 30 measurements.
Application :
• Measurements made to uneven
walls and ceilings.
height 4.5
1
2
3
1
2
3
11.454m
0 8.762m
0 8.515m
0 8.515m
height 4.5
1 0 5.595m
--.---m
accuracy 4.6
0 8.515m
accuracy 4.6
n: 10