Leica Geosystems Leica DISTO Pro - Manual (Page 5)

7 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
Introduction
DISTO TM pro 4 and DISTO TM pro 4 a, the
top of the line of the new DISTO
series, offer the most in measuring
comfort.
These instruments are perfectly
suited for quick width and distance
measurements, followed by
computations of partial distances,
areas, volumes, etc.
The three end covers supplied are
used to set the desired measurement
references (for corners, angles,
edges, tripod, etc.).
Modes of operation
Normal mode
DISTO is on, but the laser is not
operating.
This mode is for making entries,
carrying out calculations and calling
up menus.
Pointing mode
DISTO is on, the laser is operating.
Objects to be measured can be
pointed at in this mode.
Measuring mode
DISTO is on and performs single or
continuous measurements (e.g.
minimum and maximum tracking,
staking out, etc.).
This User Manual is valid for both
types, DISTO TM pro 4 and
DISTO TM pro 4 a.
References made in this manual to
the product name DISTO, are valid
for both instrument types.
• Robust; proven reliability on
construction sites
• Clear, lit displays
• Alphanumeric keypad
• Integrated pocket calculator, exten-
sive functions for calculations
• User friendly menus with short cuts
• Memory allocation for up to 800
measured values
• Language selection and selectable
measuring units
• Integrated interface for data transfer
to a PC
• DISTO TM pro 4 a: the utmost in
measuring accuracy of the DISTO
series
Special features Area of applicability