Calculator (7), Division (7.1), X2 (7.2) – Leica Geosystems Leica DISTO Pro User Manual
Page 48: Square root (7.3)
50
DISTO pro
4
/ pro
4
a-1.0.0en
English
en
The first value to be calculated with
is displayed in small font size.
The second number may be
entered with the keypad,
recalled from memory key or from
the stack,
determined by a distance
measurement.
Press briefly to compute.
The result is displayed in the basic
settings.
x
2
(7.2)
Precondition: The first value to be
computed with has to appear in the
basic settings.
After calling up the menu function the
computation is performed
immediately and the result displayed
in the basic settings.
Square root (7.3)
Precondition: The first value to be
computed with has to appear in the
basic settings.
After calling up the menu function the
computation is performed
immediately and the result displayed
in the basic settings.
The calculation functions in this
submenu supplement the four funda-
mental rules of arithmetics as
described in section "Simple
calculations".
If the wrong measuring units
are used the following error
message appears:
Area and volume dimensions cannot
be squared.
From lengths or volume dimensions
no square roots can be calculated,
etc.
Division (7.1)
Precondition: The first value to be
calculated with has to appear in the
basic settings.
Each entry with the keypad has to be
confirmed with the Enter key.
After calling up the menu function the
following is displayed:
menu
2 end cover
3 basic settings
4 basic functions
5 calculation
6 memory
7 calculator
, 6x
After calling up this menu function,
the following is displayed:
Memory, contd.
position
6.4.5.2
001
-
>
200
-
>
The vertical bar shows memory
location from the first to the last
location.
Selecting memory locations for data
transmission :
Place arrow on the first or
last memory location.
Enter the first and the last
memory location and then
one after the other the
selected memory location
numbers of the memory area.
Press briefly to confirm
selection and to start data
transfer.
...
During transmission, the number of
the current data memory location
being transmitted from is displayed.
At the end of the transmission the
submenu is displayed again.
Calculator (7)
calculator
7
1 division
2 x
2
3 square root
--.---m
/ 13.510m