Leica Geosystems Leica DISTO Pro - Manual (Page 13)

15 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
Switching off DISTO
To save batteries, the DISTO
automatically switches off after 90
seconds if no key is pressed in that
time, or it is not in Permanent mode.
Manually, the DISTO can be
switched off in different ways .
1. In Normal mode
Press both keys
simultaneously or hold one of
both keys and then press
second key.
or select menu function
"Switch off" (3.6) :
Press briefly.
Enter short cut.
2. In Pointing mode, in a menu
function, etc.:
Press one or more times until
the basic settings in Nomal
mode are displayed.
Then press both keys
simultaneously or hold one of
both keys and then press
second key.
Measuring Using menus
From the main menu, various
submenus can be called up from
which functions can be selected
(refer to short cut index).
Selecting menus / menu functions
Press briefly in Normal mode
to display the main menu.
The upper line of the main menu
shows the selected menu item with
numeric short cut.
The horizontal black bar marks the
selected menu item. If all menus are
not displayable at once, a vertical roll
bar appears at the right side,
indicating the availability of further
items.
menu
1 measure settings
2 end cover
3 basic settings
4 basic functions
5 calculation
6 memory
Repeated presses scrolls
down and highlights the
individual menu items.
If required, press repeatedly
to scroll up to get back to
individual menu items.
A brief press confirms
selection.
Now a submenu appears or a beep
sounds, while briefly displaying a
confirmation.
menu
2 end cover
3 basic settings
4 basic functions
5 calculation
6 memory
7 calculator
Switch on DISTO
Press briefly.
DISTO is in Normal mode.
Distance measurement
Press again briefly to activate
Pointing mode.
Aim at object to be measured.
Press again to trigger
distance measurement
The result is displayed in the
selected unit.