Sending a document with a sender name, Sending a document with a sender name -15, See “sending a – Canon IMAGERUNNER 2010F User Manual

Page 98: Document with a sender name,” on p. 3-15.)

Sending a Document with a Sender Name

3-15

Basic Sending

Sending a Document with a Sender Name

Follow this procedure to select one of the registered sender names.

Sender names are selected by pressing [TTI Selector] under the three one-touch
speed dialing panels.

NOTE

•

This setting is optional. If you do not select a sender name before sending a document,
the registered unit’s name is printed at the top of the document in the sender information
area. (See “Registering the Sender Information (TX Terminal ID),” on p. 1-16.)

•

If you select a sender’s name before you send a document, it replaces the unit’s name
printed in the sender information area, (See “Registering the Sender Information (TX
Terminal ID),” on p. 1-16.)

•

Up to 99 sender names can be registered. At least one sender’s name must be
registered so you can use this feature. (See “Registering Sender Names,” on p. 1-19.)

•

If the TX TERMINAL ID is set to ‘02 OFF’, the sender’s name is not printed on the
document received by the other party even if you select a sender’s name when sending.

Place your documents on the machine.

For instructions explaining how to place your originals, see “Placing Originals,”
on p. 3-6.

NOTE

You can adjust the resolution, density and image quality. (See “Adjusting the
Resolution, Density, and Image Quality,” on p. 3-12.)

Open all three one-touch speed dialing panels

➞ press [TTI

Selector].

The list of the sender names is displayed.

Press [F3] (

▼) or [F4] (▲) to highlight the desired sender’s

name

➞ press [OK].

Each time you press

(

▼) or

(

▲), the next or previous menu option

becomes highlighted.

You can also enter the assigned number of the sender’s name using the numeric
keys.

TTI Selector