Canon IMAGERUNNER 2010F - Manual (Page 326)

Setting Reports to Print Automatically 12-5
Pr
inting Repor
ts and Lists
12
3
Press [F3] (
▼) or [F4] (▲) to highlight <02 RX REPORT> ➞
press [OK].
The RX REPORT menu appears.
4
Press [F3] (
▼) or [F4] (▲) to highlight <01 OUTPUT NO>, <02
PRINT ERROR ONLY>, or <03 OUTPUT YES>
➞ press [OK].
The display returns to the REPORT SETTINGS menu.
5
Press [Reset] to return to the Fax Basic Features screen.
Confidential RX Reports
Follow the procedure below to select whether to print the confidential RX report
automatically. You can check if confidential documents were sent correctly from the
other party, or received properly without an error, using the confidential RX reports.
NOTE
• For the confidential RX report samples, see “Report Samples,” on p. 15-2.
• The default setting is ‘02 OUTPUT YES’.
1
Press [Additional Functions]
➞ press [F3] (▼) or [F4] (▲) to
highlight <03 FAX SETTINGS>
➞ press [OK].
The FAX SETTINGS menu appears.
F3
F4
OK
F3
F4
OK
Reset
Additional Functions
F3
F4
OK