Canon IMAGERUNNER 2010F - Manual (Page 219)

Setting Up Your Machine as a Relay Unit 7-12
Rela
y Broadcasting
7
21
Specify the destinations registered under one-touch speed
dialing keys or coded speed dialing codes
➞ press [OK].
The display returns to the SETUP FILE menu.
NOTE
You can specify up to 200 destinations.
22
Press [F3] (
▼) or [F4] (▲) to highlight <08 TX REPORT> ➞
press [OK].
The TX REPORT menu appears.
23
Press [F3] (
▼) or [F4] (▲) to highlight <01 DO NOT TRANSMIT>
or <02 TRANSMIT>
➞ press [OK].
<01 DO NOT TRANSMIT>: No relay transmission report is sent to the originator
after a document has been relayed.
<02 TRANSMIT>: After your machine relays a document, it sends a transmission
report back to the originator. In order for this feature to perform correctly, the
originator’s telephone number must be registered on your machine for one-touch
or coded speed dialing.
The display returns to the SETUP FILE menu.
63
01
Coded
Dial
OK
F3
F4
OK
F3
F4
OK