Canon IMAGERUNNER 2010F - Manual (Page 372)

Glossary 15-17
Appendix
15
Memory box
The memory box provides features that enable you to set up an ITU-T subaddress
and password, and enables you to use advanced features, such as confidential
sending and relay sending with a fax machine of any manufacture as long as they too
support ITU-T standard subaddress/password transactions.
Memory lock
Usually a document is printed as soon as it is received, but the memory lock feature
forces all documents to be received in memory until you enter a password to print
them. This feature prevents printed documents from piling up in the paper output tray
when the office is unattended. After you return to the office, you can print all
documents stored in memory.
Memory sending
Scanning the document into memory before the facsimile dials the number and sends
it. Scanning is fast, and you only have to wait until the original document is scanned,
not until it is sent. You can get the original back much faster, and spend less time
standing around the fax.
O
One-touch speed dialing
Each one-touch speed dialing key holds a facsimile telephone number. After the
numbers are registered, all you have to do is press one key to dial. Up to 63 numbers
can be registered for one-touch speed dialing.
P
Pause
By pressing [Pause/Redial], you can enter a pause between digits of a telephone
number when you register the number for one-touch, or coded speed dialing, or
during regular dialing. A pause may be required for a connection to an outside line, or
some countries may require a pause for overseas fax transmissions.
Pause time
The default settings are two seconds if a pause is inserted within the number (may
vary depending on your location), and 10 seconds if added to the end of the number.
Only the length of pauses inside the numbers, and not those at the end, can be
changed.