Canon IMAGERUNNER 2010F - Manual (Page 325)

Setting Reports to Print Automatically 12-4
Pr
inting Repor
ts and Lists
12
7
Press [Reset] to return to the Fax Basic Features screen.
RX Reports
Follow the procedure below to select whether to print the RX reports automatically.
You can also set to print reports only when an error occurs during receiving.
NOTE
• For RX report samples, see “Report Samples,” on p. 15-2.
• You can check if the document was received correctly from the other party using the RX
reports.
• The default setting is ‘01 OUTPUT NO’.
1
Press [Additional Functions]
➞ press [F3] (▼) or [F4] (▲) to
highlight <03 FAX SETTINGS>
➞ press [OK].
The FAX SETTINGS menu appears.
2
Press [F3] (
▼) or [F4] (▲) to highlight <02 REPORT
SETTINGS>
➞ press [OK].
Each time you press (
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The REPORT SETTINGS menu appears.
Reset
Additional Functions
F3
F4
OK
F3
F4
OK
F3 F4