Canon IMAGERUNNER 2010F - Manual (Page 39)

Registering the Required Sender Information 1-18
Bef
ore
Y
ou Use the F
ax Functions
1
The transmission type settings menu appears.
5
Press [F3] (
▼) or [F4] (▲) to highlight <01 ON> ➞ press [OK].
If you do not want the TX Terminal ID printed on the documents the recipients
receive, select <02 OFF>
➞ press [OK].
The TX TERMINAL ID menu appears.
6
Press [F3] (
▼) or [F4] (▲) to highlight <01 TTI POSITON> or
<02 TEL NUMBER MARK>.
The display returns to the USER SETTINGS menu.
● If you selected <01 TTI POSITION>:
❑
Press [OK]
➞
press [F3] (
▼) or [F4] (▲) to highlight <01 OUTSIDE IMAGE> or
<02 INSIDE IMAGE>
➞
press [OK].
<01 OUTSIDE IMAGE>: This prints the TX Terminal ID outside the image
area on the output fax.
<02 INSIDE IMAGE>: This prints the TX Terminal ID inside the image area
on the output fax.
The display returns to the TX TERMINAL ID menu.
● If you selected <02 TEL NUMBER MARK>:
❑
Press [OK]
➞
press [F3] (
▼) or [F4] (▲) to highlight <01 FAX> or <02 TEL>
➞
press [OK].
<01 FAX>: This prints the letters before the telephone number.
<02 TEL>: This prints the letters before the telephone number.
F3
F4
OK
F3
F4
F3
F4
OK
OK
F3
F4
OK
OK