Canon IMAGERUNNER 2010F - Manual (Page 70)

Setting Up Speed Dialing 2-25
Speed Dialing
2
10
Press [F3] (
▼) or [F4] (▲) to highlight <03 OPTIONAL
SETTING>
➞ press [OK].
The OPTIONAL SETTING menu appears.
11
If you want to set optional settings for your group, press [F3]
(
▼) or [F4] (▲) to highlight <02 ON> ➞ press [OK].
If you do not want to perform optional settings, highlight <01 OFF>
➞ press
(OK). The display returns to the GROUP DIAL menu to continue
registering the group.
If you want to continue registering other groups, repeat the above procedure
from step 4.
The OPTIONAL SETTING menu appears.
12
Press [F3] (
▼) or [F4] (▲) to set the desired optional setting ➞
press [OK].
● If you want to set an access code:
❑
Press [F3] (
▼) or [F4] (▲) to highlight <01 ACCESS CODE> ➞ press [OK].
F3
F4
OK
F3
F4
OK
F3
F4
OK
F3
F4
OK