Canon IMAGERUNNER 2010F - Manual (Page 286)

Program One-Touch Keys 10-3
Special F
ax F
eatures
10
Program One-Touch Keys
You have to open all three one-touch speed dialing panels to access the fax
function keys. To simplify the procedure, you can assign each function related to
faxing to any one-touch speed dialing key.
This enables you to perform a routine procedure with a single press of a key.
A one-touch speed dialing key with a fax function is called a “program one-touch
key.” The program one-touch key feature cannot be used for the copy function.
NOTE
The default setting is ‘01 DO NOT USE’.
List of Available Functions
The following 12 fax functions can be assigned to the program one-touch key
feature:
Item Description
01 PRINT REPORT
Press before starting or sending operation. A TX result report is
printed automatically when the fax transmission finishes.
02 REPORT
Same function as opening all three one-touch speed dialing panels
and pressing [Report].
03 SENDER NAME
Same function as opening all three one-touch speed dialing panels
and pressing [TTI Selector].
04 SUBADDRESS
Same function as opening all three one-touch speed dialing panels,
pressing [Advanced Communication], and selecting
.
05 DELAYED TX
Same function as opening all three one-touch speed dialing panels
and pressing [Delayed Transmission].
06 CONFIDENTIAL
Same function as opening all three one-touch speed dialing panels,
pressing [Advanced Communication], and selecting
.
07 RELAY
Same function as opening all three one-touch speed dialing panels,
pressing [Advanced Communication], and selecting .
08 POLLING
Same function as opening all three one-touch speed dialing panels,
pressing [Advanced Communication], and selecting .
09 ACCESS CODE Press to start the access code dialing.
10 SENDER'S NAME SET You can register a sender name for a program one-touch key.