Canon IMAGERUNNER 2010F - Manual (Page 193)

Memory Lock for Received Documents 6-8
Memor
y F
eatures
6
16
Follow the procedure in step 13 to set the Memory Lock end
time.
17
Press [Reset] to return to the Fax Basic Features screen.
Turning Memory Lock ON/OFF Using the Memory
Reception Key
You can turn the Memory Lock mode ON and OFF at any time you want even if you
have set the Memory Lock start and end time.
To use this mode, you must set MEMORY LOCK RX to ‘02 ON’ from the SYSTEM
SETTINGS menu. (See “Memory Lock for Received Documents,” on p. 6-2.)
If you have set a Memory Lock password, you need to enter it correctly to turn the
memory Lock mode ON or OFF using [Memory Reception].
1
Press [FAX].
lights, and the machine enters the Fax Basic Features screen.
2
Open all three one-touch speed dialing panels
➞ press
[Memory Reception].
If you have set a Memory Lock password, use the numeric keys to enter the
password
➞ press
(OK).
NOTE
• If you have set the memory lock start time, the function is turned ‘ON’ automatically
at the preset time.
• If you have set the memory lock end time, the function is turned ‘OFF’ automatically
at the preset time, and the machine prints the received documents.
• The machine has enough memory (16 MB) to sore up to 100 pages* of sent and
received documents (fewer if the document contains many graphics or particularly
dense text). If you have the optional memory module installed, you can store up to
1500 pages*. *These figures are based on the use of ITU-T No.1 chart, using the
standard settings.
Reset
FAX
FAX
Memory
Reception