Canon IMAGERUNNER 2010F - Manual (Page 89)

Placing Originals 3-6
Basic Sending
3
Placing Originals
Place your originals on the platen glass or in the feeder, depending on the size and
type of paper that you want to fax, and the settings that you have specified.
■ Platen Glass
Place the originals on the platen glass when scanning bound originals, originals on heavy
or lightweight paper, and transparencies.
■ Feeder
Place a stack of originals in the feeder
➞ press [Start]. The machine automatically scans
them into memory.
NOTE
• The size of the original is automatically detected, and the document is scanned.
However, if the output paper in the machine at the receiving end is not equal to the
scanned size, the original image is either reduced in size to match the size of the output
paper at the receiving end, or is divided into parts before being sent.
• The machine cannot always detect the size of the original if it is a nonstandard size or
object, such as a book. In this case, specify the size at which you want to scan the
original. (See Chapter 2, “Basic Copying Features,” in the Copying Guide.)