Canon IMAGERUNNER 2010F - Manual (Page 111)

Using Regular Dialing 3-28
Basic Sending
3
• If you need to temporarily switch to tone dialing when your machine is connected to
a rotary pulse line, press
(Tone). (See “Using Tone Dialing on a Pulse Line,” on
p. 10-2.)
• If you need to enter a subaddress, you can use or . (See “Sending a
Document with a Subaddress/Password,” on p. 4-18.)
• If you make a mistake during dialing, open all three one-touch speed dialing panels
➞ press
(Clear) to clear the entire entry
➞ enter the correct telephone
number. You can also use (Clear) on the control panel to clear the entire
telephone number.
• If you make a mistake during dialing and you do not want to clear the entire
telephone numbers, use the cursor keys to go back to the digit you want to correct,
open all three one-touch speed dialing panels
➞ press
(Delete) to delete the
incorrect digit ➞ enter the correct digit.
4
Press [Start].
The machine starts scanning and sending the document.
C
Start