Canon IMAGERUNNER 2010F - Manual (Page 116)

Redialing When the Line Is Busy 3-33
Basic Sending
3
● If you are sending a document using Direct Sending:
❑
The following display appears. When the machine is waiting to redial, be sure
to leave the document in the feeder.
NOTE
• To cancel redialing, press (Stop). Redialing is canceled immediately.
• If the TX Error Resend function is ON, the machine also redials when an error
occurs during sending.
• For details about setting up automatic redialing, see “Automatic Redialing,” on
p. 3-29.
• If the machine does not manage to send the document, the machine waits for
another two minutes and dials again. If the transmission fails again, sending is
canceled, and an Error TX Report is printed. (See “TX Reports,” on p. 12-2.)
Manual Redialing
1
Press [FAX].
lights, and the machine enters the Fax Basic Features screen.
2
Place your documents on the machine.
For instructions explaining how to place your documents, see “Placing
Originals,” on p. 3-6.
NOTE
• You can adjust the resolution, density and image quality. (See “Adjusting the
Resolution, Density, and Image Quality,” on p. 3-12.)
• You can also specify a sender’s name with (TTI Selector). (See “Sending a
Document with a Sender Name,” on p. 3-15.)
FAX
FAX