Canon IMAGERUNNER 2010F - Manual (Page 88)

Flow of Fax Sending Operations 3-5
Basic Sending
3
• The machine has enough memory (16 MB) to store up to 100 pages* of sent and
received documents (fewer if the document contains many graphics or particularly
dense text). If you have the optional memory module installed, you can store up to
1500 pages*. *These figures are based on the use of ITU-T No.1 chart, using the
standard settings.
• If the memory becomes full while you are scanning a document for sending, the
message appears on the LCD display. Press
(OK) so
that the paper remaining in the feeder can be put out. All the pages you were
scanning will be cancelled.
• The number of pages you can store into memory differs depending on the amount
of free memory remaining in the machine and the type of document you are
scanning.
• Press (Monitor) to check the transmission result, or cancel sending the
documents stored in memory. (See “Checking Transaction Results,” on p. 3-38.)
7
If you want to cancel sending the document, press [Stop].
8
When scanning is complete, remove your original.
9
If the optional Card Reader-E1 is attached, remove the control
card.
For instructions on using the optional Card Reader-E1, see Chapter 3, “Optional
Equipment,” in the Reference Guide.
10
If you have set Department ID Management, press [ID].
For instructions on using Department ID Management, see Chapter 6, “System
Manager Settings,” in the Reference Guide.
Stop
ID