Compex Technologies NetPassage 18A User Manual
Page 87
DMZ
1. Click
NAT
from the
CONFIGURATION
menu.
2. Ensure
that
NAT Status
is set
to Enable.
At the Advanced NAT Options
section:
3. Click
DMZ
.
1
1. In
the
Private IP Address
field,
enter the IP address of the PC
you wish to place within the DMZ.
Private IP Address is set to 0.0.0.0
by default.
2. Click
Apply
.
2
To disable DMZ:
3. In
Private IP Address
field enter
0.0.0.0
.
4. Click
Apply
.
3
!
NOTE:
1.
The Static IP Address configuration is
recommended for the DMZ host when DMZ is
enabled, as the address may change if allocated
by DHCP, causing improper functioning of the
DMZ.
2. The DMZ host is not invulnerable to malicious
attacks from the Internet as DMZ exposes ALL of
the host’s ports.