Compex Technologies NetPassage 18A - Manual (Page 61)

52
the DHCP Start IP Address should be 192.168.168.X where
X is any value from 2 to 254.
It is preset to
192.168.168.100 .
DHCP End IP
Address
This is the last IP address that the DHCP server can assign.
The value you enter should also belong to the same
subnet as your router.
For example if the IP address and network mask of your
router are 192.168.168.1 and 255.255.255.0 respectively,
the DHCP End IP Address should be 192.168.168.X where X
is any value from 2 to 254.
It is preset as
192.168.168.254 .
DHCP Gateway IP
Address
Enter the IP address of the gateway to Internet or of the
router if this access point is the one connecting to the
Internet.
If your network uses multiple gateways / access points,
you may wish the router to act as DHCP server to a LAN
segment while another access point connects to the
Internet or to another LAN.
Though the DHCP server usually acts as the Default
Gateway of the DHCP client, you can define a different
, which will be allocated as
the Default Gateway of the DHCP client.
The DHCP client will thus receive its dynamic IP address
from the router but will access the Internet or the other
LAN through the Default Gateway defined by the Gateway IP address>.
Always use these
DNS servers
Enable this option if you want the router to use only the
DNS server you have specified.
Primary DNS IP
Address
Your ISP usually provides the IP address of the DNS server.
Secondary DNS IP
Address
This optional field is for the IP address of a secondary DNS
server.
DHCP Server
If DHCP server is disabled you will need to manually
configure the TCP/IP parameters of each computer in
your LAN.