Compex Technologies NetPassage 18A - Manual (Page 21)

12
Chapter 3: Hardware Setup
Before attaching a pair of
external antennas to the router,
take note of the ‘A’ marking on
one of the two antennas.
The antenna with the ‘A’ marking
is the Dualband AG Antenna.
The antenna without the marking
is the single-band G Antenna.
Connect the single-
band G antenna to Ant-
2 on the RIGHT.
Connect the Dualband
AG antenna to Ant-1 on
the LEFT.
‘A’ marking
!
Important: To ensure proper functionality of the router,
these two antennas MUST NOT be swapped.