Compex Technologies NetPassage 18A - Manual (Page 66)

57
Bandwidth Control for WAN
Bandwidth Control allows you to decide the available bandwidth in
levels of 1kbit.
Follow these steps to setup Bandwidth Control for WAN.
Bandwidth Control for WAN
Click
Bandwidth Control from the
CONFIGURATION menu.
Select whether to Enable or
Disable Bandwidth Control
and click Apply.
To apply Bandwidth Control on WAN, in WAN
Bandwidth Control Setup:
1. Enter the Download Total Rate in kbit. This
restricts the bandwidth available for
downloading.
2. Enter the Upload Total Rate in kbit. This
restricts the bandwidth available for
uploading.
3. Click Apply.
3
1
2