Compex Technologies NetPassage 18A - Manual (Page 182)

173
Appendix A: Configuring your PC for network
access
This section illustrates how to configure the TCP/IP settings of your
computer so that it can communicate with the router or with other
computers across your network.
We will consider:
Adding TCP/IP protocol for Windows 98/98SE/ME/2000
Configuring Dynamic IP Address Allocation for Windows
98/98SE/ME/2000
Configuring Static IP Address Allocation for Windows
98/98SE/ME/2000
Configuring Wireless Network Settings for Windows XP
Adding TCP/IP protocol for Microsoft Windows 98/98SE/ME/2000
By default, the TCP/IP protocol is installed and set to obtain an IP
address automatically in Windows 98, 2K & XP.
However, if your PC does not have TCP/IP installed, the following will
guide you through the TCP/IP installation procedure.
Adding TCP/IP protocol in Windows 98/98SE/ME/2000:
1. Click on Start .
2. Select Settings .
3. Click on Control Panel .
1