Compex Technologies NetPassage 18A User Manual
Page 164
155
17. At the Settings tab of the ACITS LPR
Remote Printing screen, key in the
router’s IP address. Proceed to key
in the printer/queue name. For
example, ‘usb0’ is the name
derived from the URL of the printer
connected to the router. For
exampl
18. To check if the selected printer is
connected to the router or not,
click Verify Printer Information.
19. At the Spool Settings screen, click
the radio button next to Start
printing after last page is spooled.
20. Then click the radio button next to
Disable bi-directional support for this
printer.
21. Lastly, click OK to complete the
printer setup.