Compex Technologies NetPassage 18A - Manual (Page 120)

111
Firewall Configuration
Follow these steps to configure the firewall.
Firewall Configuration
1. Enable the firewall. You can choose
the Default Low, Default Medium, or
Default High security options for
convenient setup.
2. Choose the type of network activity
information to log for reference. Data
activity arising from different types of
protocol can be recorded.
3. The packet types selected in the
Accepted section will display in the
firewall log if they are detected by the
firewall. This also applies to the Denied
section.
Click Firewall Configuration from
the Security Configuration menu.
1
2