Compex Technologies NetPassage 18A - Manual (Page 28)

19
Client Mode
In Client mode, the device acts as a wireless Client.
When connected to an access point, it will create a network link
between the Ethernet network connected at this Client device, and
the wireless and Ethernet network connected at the access point.
In this mode it can only connect with an access point. Other wireless
clients cannot connect with it directly unless connected to the same
access point - allowing them to communicate with all devices
connected at the Ethernet port.
In the example above, the workgroup PCs will be able to access the
printer connected to the access point in Access Point Client mode.