Compex Technologies NetPassage 18A - Manual (Page 154)

145
5. Check the radio button next to the
Local printer attached to this
computer and click Next> to
proceed.
Please note that you should not select the
Automatically detect and install my Plug and
Play printer.
Next to select the printer port for your PC:
1. Check the radio button next to the
Create a new port.
2. Then
select Standard TCP/IP Port for
the type of port you will be using.
3. Click on the Next> button to
proceed.
4. When the Add Standard TCP/IP
Printer Port Wizard appears, click on
the Next> button to proceed.