Compex Technologies NetPassage 18A - Manual (Page 122)

113
congestion.
Redirect Informs the host of a preferred route.
Time exceeded Indicates that the Time-to-Live (TTL) of an
IP datagram has expired.
Parameter
Problem Informs that host that there is a problem in
one the ICMP parameter.
Timestamp
Request Information that is from the ICMP data
packet.
Information
Request Information that is from the ICMP data
packet.
Information Reply Information that is from the ICMP data
packet.
IGMP Types
: This IP protocol is used to establish host memberships in particular
multicast groups on a single network. The mechanisms of the
protocol allow a host to inform its local router, using Host
Membership Reports.
Host Membership
Report Information that is from the IGMP data
packet.
Host Membership
Query Information that is from the IGMP data
packet.
Leave Host
Message Information that is from the ICMP data
packet.
Source IP : This parameter allows you to specify workstation(s) generating the
data packets. Users can either set a single IP address or set a range
of IP addresses.
Destination IP : This parameter lets you specify the set of workstations that receive
the data packets. Users can either set a single IP address or set a
range of IP addresses.
Source Port : You can control requests for using a specific application by
entering its port number here. Users can either set a single port
number or a range of port numbers.
Destination Port : This parameter determines the application from the specified
destination port. Users can either set a single port number or a
range of port numbers.
Check Options : This parameter refers to the options in the packet header. The