Compex Technologies NetPassage 18A - Manual (Page 110)

101
To Enable Parallel Broadband
Parallel Broadband can be implemented when:
More than one access point is interconnected (LAN port to LAN
port) in your network.
Each access point is connected to a broadband Internet account.
Parallel Broadband
Click Parallel Broadband from
the CONFIGURATION menu.
Parallel Broadband is disabled by
default.
1
1. Enable the Parallel Broadband
Status.
2. Click Apply .
3. Repeat this for the other access
points in your network.
This would enable them to
intercommunicate and reassign
users to the access point with the
smallest load, so that the users are
distributed equally among the
access points.
2