Compex Technologies NetPassage 18A - Manual (Page 43)

34
For ASCII key entry:
1. Select the ASCII radio
button.
2. Select the radio button
of the key to be
entered.
3. Select the key
encryption mode from
the drop down menu.
4. Fill in the key value.
An ASCII value can take in any
alphanumeric character and is
NOT case-sensitive.
For 64-bit encryption:
Your WEP key has to be 5
characters long.
For 128-bit encryption:
Your WEP key has to be 13
characters long.
5. Click on Save .
6. If the key format is valid,
the page will refresh
and the key will appear
in encrypted form.
3
To add more hexadecimal WEP keys,
repeat step 2.
To add more ASCII WEP keys, repeat
step 2.
You can set a maximum of 4 WEP keys
using different key entry methods and
encryption levels.
To specify which key to use:
1. Select the radio button of
the key to be used.
2. Click on Apply , then on
Reboot to apply the
changes.
4