Casio FX-CG10 - Manual (Page 425)

CASIO
12-2
k Power Properties Settings
u To specify the Auto Power Off trigger time
While the initial System mode screen is displayed, press
2(PWRProp) to display the Power
Properties setting screen.
•
1(10Min) ... {10 minutes} (initial default setting)
•
2(60Min) ... {60 minutes}
Press
J or !J(QUIT) to return to the initial System mode screen.
u To specify the backlight duration
1. While the initial System mode screen is displayed, press
2(PWRProp) to display the
Power Properties setting screen.
2. Use f and c to select “Backlight Duration”.
•
1(30Sec) ... {turns off the backlight 30 seconds after the last key operation is performed}
(initial default setting)
•
2(1Min) ... {turns off the backlight one minute after the last key operation is performed}
•
3(3Min) ... {turns off the backlight three minutes after the last key operation is performed}
3. Press
J or !J(QUIT) to return to the initial System mode screen.