Casio FX-CG10 - Manual (Page 359)

CASIO
9-8
k Data (Constants, Text, Formula) Input Basics
First let’s have a look at a few basic procedures that apply regardless of the type of data you
are inputting.
u To overwrite data currently in a cell with new data
1. Move the cell cursor to the cell where you want to input data.
• If the cell you select already contains data, the following step will overwrite the existing
data with new input.
2. Use the calculator’s keys to input data.
• As you perform key operations to input values or text
(such as b,
al(B), etc.), the applicable figures
will appear aligned left inside the edit box.
• To cancel an input operation part way through at any
point before advancing to step 3 below, press
J. This
will return the cell contents to what they were in step 1
of this procedure.
3. To finalize and apply your input, press
w.
u To edit cell data
1. Move the cell cursor to the cell whose contents you want to edit.
2. Press
2(EDIT) 3(CELL).
• Cell contents in the edit box will change from align right
to align left. A text cursor will appear in the edit box so
you can edit its contents.
3. Use e and d to move the cursor around the contents of the cell, and edit them as
required.
• To cancel an edit operation part way through at any point before advancing to step 4
below, press
J. This will return the cell contents to what they were in step 1 of this
procedure.
4. To finalize and apply your edits, press
w.
u To move the cell cursor while inputting data into a cell
Under factory default settings, pressing
w while inputting data into a cell will cause the cell
cursor to move to the next line. You can specify movement to the next column instead using the
“Move” setting as described on page 1-35.