0 print formatting, 1 print formatting commands, Print formatting – Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.2 User Manual

Page 76

Counterpart User Manual

7.0

Print Formatting

The Counterpart provides nine print formats,

GFMT, NFMT, TOTALFMT, PALFMT, CFMT, ACCFMT, SPFMT,

HDRFMT1

, and

HDRFMT2

. These determine the format of the printed output when the

key is pressed or

when a

KPRINT

EDP command is received. The

HDRFMT

s must be called from another format. The SPFMT

(setpoint print format) is printed from a setpoint routine.

Each print format can be customized to include up to 500 characters of information, two header formats are
limited to 100 characters each), such as company names and addresses, on printed tickets. You can use the
indicator front panel (

PFORMT

menu), EDP commands, or the

Revolution

configuration utility to customize

the print formats.

Print formats are limited to 500 characters. The two header formats are limited to 100 characters
each

7.1

Print Formatting Commands

Table 7-1 lists commands you can use to format the gross, net and count print formats. Commands included in
the format strings must be enclosed between < and > delimiters. Any characters outside of the delimiters are
printed as text on the ticket.

Note