Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.2 - Manual (Page 39)

Counterpart User Manual - Configuration 33
Level 5 submenus - Under the Level 4 SCLCHG Feature
REZERO OFF
ON Performs a zero function on change.
CHKSTBLE ON
OFF When changing scales, a stability check can be either enabled or disabled. If enabled, and the
stability check is successful, no indication is shown and the unit switches to the next scale. If
enabled and the stability check fails, then NON-STABLE is shown on the display and the
switch to the next scale is not made.
XFRTARE OFF
ON When changing scales, the tare weight is transferred from the current scale to the new scale.
Units must be set to the same unit of measurement.
XFRUTWT ON
OFF When changing scales, the unit weight is transferred from the current scale to the new scale.
Level 5 submenus - Under the Level 4 DATE Feature
DFORMT MMDDY4
DDMMY4
Y4MMDD
Y4DDMM
MMDDY2
DDMMY2
Y2MMDD
Y2DDMM Sets the date format. Y4 will use a four-digit year value, such as 2011, while Y2 will use a
two-digit value, such as 11.
D SEP SLASH
DASH
SEMI Sets the date separator as a slash, dash, or semicolon.
Level 5 submenus - Under the Level 4 TIME Feature
TFORMT 12 HOUR
24 HOUR Sets the time format.
T SEP COLON
COMMA Sets the time separator as a colon or a comma.
FEATUR Menu
Parameter Choices Description
Table 3-5. FEATUR Submenu Parameters (Continued)