Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.2 - Manual (Page 10)

4 Counterpart User Manual
Figure 1-1. Numeric Keypad
1.5 Tare Recall
When a stored tare is displayed, Net annunciators will
be turned on. To display a stored tare,
1. Set up a soft key (see Softkey Setup below).
2. Press the DISPLAY TARE softkey .

The tare value will be displayed. If there is no
tare in the system, pressing the
TARE key will
have no effect. The Gross/Net annunciators
are not lit and a value is displayed in weight
display area.
1.6 Annunciator Symbols
Annunciator Description
Zero (Center of Zero)
While in gross weight display mode, this LED
indicates that the current displayed weight
reading is within +/-0.25 display divisions of the
acquired zero, or is within the center of zero
band.
When in the net weight display mode, it
indicates that the current net weight reading is
within +/-0.25 display divisions of the center of
net zero. A display division is the resolution of
the displayed weight value, or the smallest
incremental increase or decrease that can be
displayed or printed.
Gross weight mode (or Brutto in OIML mode)
Net weight display mode.
Battery symbol. indicates the level of the
battery.
Scale is at standstill or within the specified
motion band. Some operations, including tare
functions and printing, can only be done when
the standstill symbol is shown
Table 1-3. Annunciator Symbols
G/B
N