Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.2 - Manual (Page 44)

38 Counterpart User Manual
OPTCARD NONE
FIBER
ETHERNET
WI-PORT
RESERVED
USB
RS232-432
KEYBOARD Option card parameters. Select which connection can be selected when using a
wireless option card and WeighVault.
When setting up the USB option and opening Revolution, you
may be asked to load a driver if Windows PC has never used a
USB driver before.
Level 3 submenus - Under the Level 2 Ethernet Feature
VAULT OFF
ON BOARD
EXTERNAL Selects on or off
Using on board RJ45 Ethernet connection
Using wireless port connection
DHCP ON
OFF Dynamic Host Configuration Protocol
ON - obtains IP address, primary and secondary DNS IP addresses, netmask,
and default gateway IP address from a DHCP server
OFF - use static settings for the above parameters
IPADRESS IP address. This can be leased (provided by DHCP server) or statically set
NETMASK Subnet address
DFFLTGTWY IP address for default gateway
DNSPRI Primary domain server IP address
DNSSEC Secondary domain server IP address
LCLHSTNM Counterpart Local host name
PORT Port number used
REMOTEIP Remote IP address using WeighVault
REMOTEPT Remote port number using WeighVault
MAC Views the MAC address and is non-changeable
ECHO ON
OFF Allows Echo to be on or off
Level 3 submenus - Under the Level 2 Version Feature
SOFTWR 2.xx Displays the software version
REG LR, V 1.XX Displays the legally relevant version
Level 3 submenus - Under the Level 2 DIGIO Feature
DIGIO DIO 1-4
Level 3 submenus - Under the Level 2 PFORMT Feature
GFMT Gross format
NFMT Net format
CFMT Count format
PALFMT Pallet format
ACCFMT Accumulator format
TOTALFMT Total format
HDRFMT1 Header 1 format
HDRFMT2 Header 2 format
Level 4 Submenus - Under the Level 3 DIO Feature
SETUP Menu
Parameter Choices Description
Table 3-7. Serial, PFORMT, DIG I/O, VERS submenu parameters (Continued)
Note