Rice Lake CB-2 Concrete Batch Controller Version 2.0 - Manual (Page 77)

Installation/Operation Manual - Appendix 73
10.9 CB-2 Loss In Weight Inching Gate
When configuring the CB-2 for an inching gate it is important to know the time in seconds required to fully open
and close the gate. Manually open the discharge gate and record the amount of time in seconds required to fully
open the gate. Repeat a few times for accuracy. Average the time readings and this number will represent the
“fully open time” for the gate. This process can be reversed to calculate the “fully closed time”.
Admin Menu
Databases
Scales
Aggregate
SCALE TYPE = DECUMULATIVE
Discharge controls
GATE TYPE = INCHING
Admin Menu
Databases
Location
(Aggregate 1)
Delivery Mode = Inching gate
Open Gate = Slot 3, Bit 01
Close Gate = Slot 3, Bit 05
Gate Open Time = as recorded
Gate Close Time = as recorded
Inch Time = (Keep in mind “gate open/close time” when selecting entry. Start with 30ms)
Initial Burst Time = (Keep in mind “gate open time” when selecting entry. Start with .1 sec)
Slot 3 bit 01 thru 04 represent open gate for agg 1-4
Slot 5 bit 05 thru 08 represent close gate for agg 1-4