Rice Lake CB-2 Concrete Batch Controller Version 2.0 - Manual (Page 53)

Installation/Operation Manual - Utilities 49
6.2.1 Min. Drop Screen
Press the
Min. Drop Screen
softkey to access this parameter. The following screen is displayed.
05/30/2013 08:13AM
Start
Warning!
SCALE 1
Back to Tune
Plant Menu
The Operator MUST ensure that all
personnel are in a safe place. The
activation of moving equipment can
occur at any time!
Next Material
Select material and set number of tries by using
the ‘Next Mat’ and ‘Tries + 1’ softkeys.
Min Drop Setup
Mat: Trash Sand Weight: 30900 Tries: 0/4
Minimum Drop: 500 lb
Manual Min
Drop Entry
Tries + 1
Figure 6-9. Min Drop Screen
Start
Press the
Start
softkey to activate the
min. drop
parameter. The following screen is displayed.
05/30/2013 08:13AM
Accept Ave
Warning!
SCALE 1
Exit
The Operator MUST ensure that all
personnel are in a safe place. The
activation of moving equipment can
occur at any time!
Reject Ave
Press ‘Accept Ave’ to save the calculated average
minimum drop. Press ‘Reject Ave’ to restore the
old value.
Min Drop Setup
Mat: Trash Sand Weight: 30900 Tries: 0/4
Minimum Drop: 500 lb
Cutoff weight above capacity.
Figure 6-10. Min Drop Parameter Start Screen
Press the
Accept Ave
softkey to save the calculated average minimum drop or press
Reject Ave
to restore the old
value. Once complete, you are instructed to press the
Next Mat
to move onto the next material or press
Start Min.
Drop Test
to start the average min. drop tests.
Next Material
Press the
Next Material
softkey to scroll through the list of available materials. They are displayed with the arrow
in the Mat: box which is shown in Figure 6-10.
Manual Min. Drop Entry
Select the
Manual Min. Drop Entry
softkey to access this parameter. Enter the minimum drop (in lbs) using the
numeric keys on the 920i and press
enter
to save that number.
Tries + 1
Press the
Tries + 1
softkey to scroll through the list of available tries. They are displayed with the right arrow in
the Tries: box which is shown in Figure 6-10.