Rice Lake CB-2 Concrete Batch Controller Version 2.0 - Manual (Page 27)

Installation/Operation Manual - Configuration of User Parameters 23
4.1 Application Parameters
05/30/2013 08:13AM
Exit
Application Parameters
SCALE 1
Application Parameters : ==>
Databases : ==>
Intervals and Timers : ==>
Serial Ports : ==>
Simulation Mode Setup : ==>
Clock : ==>
Password : ==>
Select Category
The Application Parameter menu category is the first item displayed under the
Admin Menu
softkey.
Figure 4-3. Application Parameters Screen
If there is a right arrow displayed on the 920i screen, that means that there are more menu choices to choose
from. Press the
right
arrow key on the 920i to access additional menu choices. A list of sub menus are displayed.
Again, press the
right
arrow to access the additional sub-parameters as shown below.
05/30/2013 08:13AM
Exit
Batching Preferences
SCALE 1
Batching Preferences : ==>
Batching Limits : ==>
Water System : ==>
Admix System : ==>
Mixing System : ==>
Tickets/Reports Setup : ==>
IDS : ==>
Application Parameters
Figure 4-4.
05/30/2013 08:13AM
Exit
Order Based Loading
SCALE 1
Order Based Loading : Yes
Metric (S.I.) System : No
State Regulatory Mode : Standard
Prompt for Truck ID : Yes
NET Mode Batching : No
Split Batching Allowed : Yes
Split Batch Even 1/4 : Yes
Batching Preferences
‘Discharge’ Keypress Required : FirstBatch
Aggregate Conveyor Control : Manual
Maintain Conveyor Power : No
No Yes
Batching Preferences
Figure 4-5. Order Based Loading
Each menu item is set up similarly by navigating through the various menu structures and entering parameter
values for each.
The following tables describe the sub-parameters for each parameter listed.