Rice Lake CB-2 Concrete Batch Controller Version 2.0 - Manual (Page 58)

54 Installation/Operation Manual
6.4.3 Test Ticket Printer
05/30/2013 08:13AM
Test Inputs
Warning!
SCALE 1
More ->
The Operator MUST ensure that all
personnel are in a safe place. The
activation of moving equipment can
occur at any time!
Test
Outputs
Test Ticket
Printer
Back to
Utilities Menu
Check printer for report.
Pressing the
Test Ticket Printer
softkey activates the following instruction,
Check printer for report
.
Figure 6-18. Test Ticket Printer Display Screen
If the test report doesn’t print, check that the baud rate and parity setting match and/or check the printer wiring.
6.4.4 Test Report Printer
Pressing the
Test Report Printer
softkey activates the following instruction,
Check printer for report.
If the test report doesn’t print, check that the baud rate and parity setting match and/or check the printer wiring.
6.4.5 Test Serial Ports
05/30/2013 08:13AM
Stream Data
Warning!
SCALE 1
Exit
The Operator MUST ensure that all
personnel are in a safe place. The
activation of moving equipment can
occur at any time!
Stop
Streaming
Port Stream Received
1- No
2- No
3- No
4- No
Press the
Test Serial Ports
softkey to access the streaming test.The following screen is displayed.
Figure 6-19. Test Serial Ports Display Screen
If you want to test the stream data, press the
Stream Data
softkey. You will be instructed to enter the port to
stream. Enter the port using the numeric keypad on the 920i, and press
enter
. Port 2 will then start streaming and
will continue to stream until the
Stop Streaming
softkey is selected.
6.4.6 Print Diagnostics
Pressing the
Print Diagnostics
softkey activates the following instruction,
Check printer for report.
6.4.7 Clear Diagnostics
Pressing the
Clear Diagnostics
softkey activates the following instruction,
Check printer for report.