30 ssg installation – Oldcastle BuildingEnvelope Reliance-IG SS User Manual
Page 33
30
R E L I A N C E - I G S S I N S T A L L A T I O N M A N U A L
FIGURE 33
Head Bridge Installation
FIGURE 34
Sill Bridge Installation
Crititcal to seal between edges of
horizontal face and bridge. Tool
sealant at interior and exterior
surfaces.
FS-114
#8 X 3/8" FHSMS
FS-114
#8 X 3/8" FHSMS
Critical seal between edges of horizontal
face and bridge. Tool sealant at interior
and exterior surfaces.
NOTE: Cap seal all fasteners after
installation of bridges.
Apply sealant to top of sill bridge.Apply
additional selant along edges of mullion
cap and sill once bridge is installed and
tool sealant to insure proper seal along
all surfaces.
Apply sealant to mullion and along edge as
shown. Seal across face of mullion making
sure to inject sealant into glazing reglets
and clip pocket. Apply additional sealant along
edges of mullion cap and generous bead of
sealant along each end of mull cap.
IW-300-01
Head Bridge
IW-302-01
Sill Bridge
SSG BRIDGE INSTALLATION