Kontron CG2200 Carrier Grade Server - Manual (Page 58)

51
Kontron CG2200 Carrier Grade Server Installation and Maintenance Guide
Figure 36: Installing and Securing the Riser Card Assembly
4.8 Installing a Remote Management Module 4
The Remote Management Module (RMM) solution for the CG2200 server uses RMM4 in the iBMC on the
S2600CO server board. There are two options: the Intel® Remote Management Module 4 kit and the
Intel® Remote Management 4 Lite kit. The example used in this section is the RMM4 option. This RMM4
kit includes the module, mounting brackets, a long and short ribbon cable to connect the module to the
server board, and a small key card.
To install the RMM4 module you must first remove the chassis cover and the left-side, slot 2 riser card
assembly.
1. Power down the server and remove all peripheral devices and the power cord(s)