Kontron CG2200 Carrier Grade Server User Manual
Page 12

5
Kontron CG2200 Carrier Grade Server Installation and Maintenance Guide
Table 1. CG2200 Server Features
Feature
Description
Peripheral Interfaces
External connections:
DB-15 video VGA connector (rear)
DB-15 alarms connector (rear)
RJ45 COM2 connector (front)
Four RJ45 10/100/1000 Mbps network connections (rear)
Four USB 2.0 connectors (rear)
One USB 2.0 connector (front)
One DB9 COM1 connector (rear)
One RMM4 dedicated management NIC (optional)
Internal connections:
One internal USB headers for embedded flash drives
One RMM4 connector for an Intel® Remote Management Module 4
module (optional)
Video
Integrated Matrox G200 2D video graphics controller
LAN
Four 10/100/1000 Mbps Intel
®
I350 PHYs
Expansion Capabilities
Riser card options:
Two riser slots to support
a single slot PCIe x16 riser or
a dual slot PCIe x8 riser
(left side slot 2)
a single slot PCIe x16 riser or
a dual slot PCIe x8 riser or
a dual PCI-X active riser
(right side slot 5)
Hard Drive Options
Up to six 2.5-inch SAS HDD or SATA SDD hard drives
Onboard SAS SWRAID 0/1/10 via ESRTII or RSTe
Peripherals
Up to two SD flash modules (front panel access)
Front Panel Buttons
Power on/off
System reset
Chassis ID
NMI
Front Panel LEDs
Power status
Chassis identification
System status
Fan status
HDD activity/fault
NIC activity
Alarms (critical, major, minor, power)
Power Supply
Up to two 650W power supply modules (AC or DC)
Fans
Two redundant, hot-swappable CPU1/memory and right-side PCI
assembly area cooling fans
Two redundant, hot-swappable CPU2/PCI area cooling fans