Dynojet 248x: Installation Guide - Manual (Page 9)

Document #98219101 1 - 5
Other Requirements
Shop Air
The dyno air brake requires a 3/8-inch air hose with a minimum
pressure of 60 psi.
You must provide 3/8-inch air line that will reach from the
dynamometer to the Air Pressure Regulator and another air hose
to connect the regulator to your shop air supply.
Computer Requirements
You will need to provide a computer system to run the WinPEP
software. WinPEP 7 includes complete documentation in online
Help. From the WinPEP 7 menu bar, choose Help WinPEP 7
Help or visit www.winpep.com (accessible with a valid user
name and password).
minimum system requirements recommended systems requirements
• Microsoft® Windows 2000/XP • Microsoft® Windows 2000/XP
• Pentium 800 MHz Processor • 2.4 GHz Processor or greater
• 256 MB of available RAM • 256 MB of available RAM or greater
• one COM port, two COM ports for
Tuning Link
• one COM port, two COM ports for
Tuning Link
• 800x600, 256 color monitor (SVGA) • 1280x1024 256 color monitor
(SVGA) or better
• 1.2 gigabyte hard drive • 1.2 gigabyte hard drive
• 30 MB of available hard-disk space • 100 MB of available hard-disk space
• CD ROM and floppy disk drive • CD ROM and floppy disk drive
• printer, if hard copies are needed • printer (preferably HP DeskJet®)