Uncrating the dyno – Dynojet 248x: Installation Guide User Manual

Page 10

1 - 6

Document #98219101

Uncrating the Dyno

Step 1

Use a crowbar or the like to remove the

plywood shipping shell from the

dynamometer.

• Remove catwalk pallet from the top of the

crate (if purchased).

• Remove the top of the crate.

• Remove the sides of the crate.

• Remove the bottom skids and discard.

Step 2

Remove the front and back dyno covers.

Step 3

Carefully remove the cardboard boxes and

brake weldments that are stored within the

dynamometer’s frame.

This manual is related to the following products: